JAROLIFT TDEF10/14 Instrucciones Originales página 104

EINSTELLUNGEN
SETTINGS / PARAMÈTRES / AJUSTES / IMPOSTAZIONI / INSTELLINGEN /
USTAWIENIA / AYARLAR
Deleting the end points (end positions)
Take special care after the deletion process, as there is a risk of the roller
shutter curtain being pulled into the roller shutter casing or the closed curtain
being rolled up "negatively" and damaged!
Deletion of the upper end point
1. Stop the motor using the STOP button.
2. Press the UP and DOWN buttons on the transmitter at the same time.
3. Then press the STOP button 4x.
4. Press the UP button within 10 seconds.
The motor will confirm the deletion of the upper end point by vibrating briefly.
UP and DOWN
Deletion of the lower end point
1. Stop the motor using the STOP button.
2. Press the UP and DOWN buttons on the transmitter at the same time.
3. Then press the STOP button 4x.
4. Press the DOWN button within 10 seconds.
The motor will confirm the deletion of the lower end point by vibrating briefly.
UP and DOWN
104
4 x STOP
4 x STOP DOWN
UP