Brandson 305385 Manual Del Usuario página 32

5. Assembly
Outdoor sensor
Your wireless 5-IN-1 sensor measures the wind speed, wind direction,
rainfall, temperature and humidity.
Inserting the batteries
Open the battery compartment cover underneath the sensor and insert
the batteries according to the indicated polarity.
Replace the battery compartment cover.
Caution! Ensure that the waterproof O-ring is properly in place to ensure
water tightness.
Assembling the stand (outer sensor)
• Install the sensor in an open area with 15 m clearance in all direc-
tions.
• The sensor has to be mounted on a stable platform or bracket, which
is fixed at least 1.5 m above the ground.
• The base of the sensor is screwed to the platform and the support
frame. Tighten the large nut that secures the support rod to the
base.
• When installing the sensor body, adjust it such that the solar panel
faces south. Otherwise the wind direction will be wrong. Note the
"N" for north mark on the top of the sensor (a compass is required
for checking, and the "N" for north mark is the same as the "N" of
the compass).
When installing the sensor, use the top spirit level to ensure that the
sensor is aligned horizontally. Otherwise the accuracy of the rainfall
measurement will be affected.
32
English