Air Live WL-5460AP v2 Guía De Instalación Rápida página 4

Important Information
The AP mode's default IP address is 192.168.100.252
The default Subnet Mask is 255.255.255.0
The default SSID is airlive
The default Channel is 13
In AP, Client, Bridge, and Repeater mode, the default DHCP Server is
disabled. Please set your PC's IP address to the same subnet as the
AP to access the AP.
In WISP mode and WISP+Universal mode, the DHCP server is
enabled. Please restart your PC to renew the IP address.
Support of all 7 modes of wireless functions :
AP, Client, Bridge, WDS Repeater, Universal Repeater,
WISP(Client Router), and WISP + Universal Repeater
Note: If you setup the wireless mode and push the setup button, but
can't pop-up window, please disable the pop-up block function
of the Yahoo or Google toolbar to allow pop-up window on your
browser.
GPL Compliance: Part of the device's firmware use GPL licensed
code. There is no warranty for the GPL software. You can get a copy
of the GPL source code from our website at
http://www.airlive.com/gpl.htm.
Channel
Countries
USA (FCC)
Europe (ETSI)
Wireless Access Point
WL5460AP v2
Allowable Channel
Channel 1~11
Channel 1~13
English
3
3