Getting started
Charging the battery pack
Charge the battery before using the battery pack for the first time or when the
battery pack has been unused for extended periods.
Use only Samsung-approved chargers and cables. Unapproved chargers
or cables can cause the battery to explode or damage the battery pack.
1
Connect the battery pack to the USB power adapter via the USB cable. Plug
the USB power adapter into an electric socket.
Connecting the charger improperly may cause serious damage to the
battery pack.
Any damage caused by misuse is not covered by the warranty.
• You can charge the battery pack using the charger (sold separately).
• Using a power source other than the charger, such as a computer, may
result in a slower charging speed due to a lower electric current.
• The battery pack can be used while it is charging, but it may take longer
to fully charge the battery.
• While charging, the battery pack may heat up. This is normal and should
not affect the battery pack's lifespan or performance. If the battery gets
hotter than usual, the charger may stop charging.
• The actual capacity (Wh) is measured based on the battery's output
current and voltage. It may differ from the capacity (Wh) indicated on
the device, depending on the output power condition, the connected
device's circuit configuration, and the operation environment.
• If the battery pack is not charging properly, take the battery pack and
the charger to a Samsung Service Center.
4
English (USA)
3