Tabla de contenido
Publicidad
Using the battery pack
Charging the mobile device
1
Connect one end of the USB cable to the battery pack's USB charger port.
Then, plug the other end of the USB cable into the mobile device's
multipurpose jack.
2
After the mobile device is fully charged, disconnect the USB cable from both
devices.
• If the mobile device is not charging after being connected to the battery
pack, press the Reset button.
• The battery pack is an auxiliary external battery. It may not fully charge
some mobile devices.
• If the battery pack is exposed to extremely hot or cold temperatures or
an error occurs, the indicator light will flash red. Disconnect the mobile
device from the battery pack, and then reconnect them.
English (UK)
5
Publicidad
Tabla de contenido
