Important Safeguards - Russell Hobbs 22220-56 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
Read the instructions, keep them safe, pass them on if you pass the appliance on.
Remove all packaging before use.

IMPORTANT SAFEGUARDS

Follow basic safety precautions, including:
This appliance can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been supervised/instructed and
understand the hazards involved.
Children must not use or play with the appliance. Keep the
appliance and cable out of reach of children.
Always disconnect the appliance from the mains supply socket
if it is left unattended and before assembling, disassembling or
cleaning.
To avoid injury, take care handling the blades, emptying, and
cleaning.
Don't add hot liquid (over 40°C), as it may be ejected due to
sudden steaming.
Misuse of the appliance may cause injury.
If the cable is damaged, it must be replaced by the
manufacturer, its service agent, or someone similarly qualified,
to avoid hazard.
Don't put the motor unit in liquid.
Don't try to chip ice, don't try to chop raw meat, and take great care
with the blades.
Don't run the motor for more than 1 minute at a time, then leave it for
a minute to cool down before using it again.
Don't use the appliance for any purpose other than those described in
these instructions.
Don't operate the appliance if it's damaged or malfunctions.
DIAGRAMS
1.
lid
2.
tab
3.
blade unit
4.
bowl
5.
switch
6.
groove
PREPARATION
1.
Sit the motor unit on a stable, level surface.
2.
Lower the bowl over the spindle.
3.
Locate the tabs under the bowl in the slots in the base.
4.
Turn the bowl clockwise to lock it in place.
5.
Lower the blade unit over the spindle in the bottom of the bowl.
6.
Rotate it till it drops to the floor of the bowl.
HOUSEHOLD USE ONLY
7.
8.
9.
10. peg
` Dishwasher safe
3
spindle
slot
motor unit

Publicidad

Tabla de contenido
loading

Tabla de contenido