Human Touch HT-1470 Manual De Uso Y Cuidado página 4

get ready
Unpack the box
Backrest Pad
Controller
Seat Pad
humantouch.com humantouch.com
Chair Sofa
1. Place the pad
Place your Human Touch ™ massage pad onto any chair or sofa. Its thin-ply
ergonomic design rests comfortably between you and the seat.
6
Flap Strap
Strap
Back of pad
2. Secure the back massage pad (optional)
To secure the back massage pad to the backrest of a chair:
1. Pull up on the flap located on the back of the massage pad to expose the retaining straps.
The straps are held in place by hook-and-loop fasteners.
2. Open the straps, then wrap them snugly around the chair.
3. Attach the straps to each other, using the hook-and-loop fasteners.
3. Plug it in
Plug the power cord into a 120-volt power source.
4. Power on
Push the power/park button to power on the back
massage pad.
Your Human Touch ™ massage pad
comes fully assembled – simply
place it onto the seat of your
choice, secure it if you wish,
plug it in and power it on.
CAUTION:
Do not position the
massage pad on a surface that is
reclined further than shown.
7