Mitsubishi Electric QAHV-N136TAU-HPB Manual De Instrucciones/Instalación página 52

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

(7) Selecting the item that normally appears on the LED
SW2
-10
5
OFF
OFF
OFF
OFF
OFF
ON
OFF
ON
OFF
OFF
(*1)
"S" will be displayed while the fan is forced to operate.
"-" will be displayed when this function is disabled.
"d" will be displayed when the peak-demand control function is enabled.
"-" will be displayed when this function is disabled.
Displays the operation mode.
"H" will be displayed during water-heating operation.
"d" will be displayed during a defrost cycle.
"F" will be displayed while the pump is being operated to prevent freeze-up.
(*2)
Displays the system control mode.
"S" will be displayed when the multiple system control option is used.
"A" will be displayed when the individual system control option is used.
SW3
6
7
8
OFF
ON
OFF
ON
ON
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
The dot lights up when the operation signal is on.
The dot lights off when the operation signal is off.
"A" will be displayed while the compressor is in operation.
"S" will be displayed while the compressor is stopped.
9
10
OFF
OFF
Displays the operation mode.(*1)
OFF
OFF
Displays the operation mode.(*2)
OFF
OFF
Displays the current water temperature.
OFF
OFF
Displays the water-temperature setting.
OFF
OFF
Displays the high and low refrigerant pressures.
GB-52
Display content

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Qahv-n136tau-hpb-bs

Tabla de contenido