Conceptronic Grab'n'GO Wireless Media Store CH3WNAS Guía De Instalación Rápida página 43

ENGLISH
The security policies which are being used by Windows Vista are not supported by the
Samba software in the CH3WNAS.
Therefore, to use file shares/folders of the CH3WNAS, you need to change this the
security policies of Windows Vista.
Changing the security settings.
1. Click "Start" -> "All Programs" -> "Accessories" -> "Run".
2. Type "secpol.msc" and click "OK".
3. Allow Windows to open the Security Policies window by clicking "Continue".
4. Click "Local Policies" and choose "Security options".
5. Right click on "Network security: LAN Manager authentication level" and select
"Properties".
6. Change the value "Sent NTLMv2 response only" to "Send LM&NTLM - use NTLMv2
session security if negotiated".
7. Click "Apply" and "OK" and close the Security Policies screen.
8. Reboot your computer.
You can now map a network drive to your computer with the steps below:
1. Right click on "Computer" and select "Map network drive...".
2. Select the drive letter you want to use (for example "Z:").
3. Type the folder which you want to map (for example "\\CH3WNAS\HDD_a").
4. Click "Different user name" and type the username "Guest" (or another username)
and the password which is configured for the CH3WNAS share.
5. Click "OK" and Click "Finish".
Your CH3WNAS share is now mapped to a driveletter on your computer.
! Windows Vista Network Note !
43