Seliger AQUASPOT 100 POWER LED Instrucciones Para El Uso página 16

PUTTING INTO OPERATION AND MOUNTING
ill.3
The ground stand is made for permanent and very stable mounting (ill. 4). The Aquaspot 100 Power LED can
be screwed to the ground, to walls or under a roof. For use on loose and sandy ground or in the water of a pond,
the stand should be screwed firmly and securely to a flat and heavy stone or to a concrete-plate. For mounting
with the ground stand, a hole must be drilled to fix the Aquaspot 100 Power LED safely and resistantly with
dowels and screws (these are not contained in the delivery).
ill.4
16 ENGLISH