protection and oiling. Ask your
Customer Service department to
recommend a suitable spray.
You can oil the cutting tools as
described, each time before us-
ing the device.
CAUTION ● Only use acces-
sories and spare parts which are
approved by the manufacturer.
Only original accessories and
original spare parts ensure that
the appliance will run fault-free
and safely.
ATTENTION ● Clean the prod-
uct with a soft, dry cloth each
time after use.
Note ● Service and mainte-
nance work may only be per-
formed by suitably qualified and
specially trained personnel. We
recommend sending the product
to an authorised service centre
for repair. ● You may only per-
form the adjustments and re-
pairs described in these
operating instructions. Contact
your authorised Customer Ser-
vice department for other re-
pairs.
Residual risks
WARNING
● Certain residual risks remain
present, even when the device
is operated in the prescribed
manner. The following dangers
can be present when using the
device:
26
Severe injuries through con-
tact with the cutting tool. Keep
the cutting tool away from
your body. Use the blade
guard when not cutting.
Vibration can cause injuries.
Use the correct tools for the
job, use the handles provided
and restrict the working time
and hazard exposure time.
Noise can cause hearing inju-
ries. Wear hearing protection
and limit the duration of expo-
sure.
Risk reduction
CAUTION
● Using the device for longer pe-
riods can cause poor circula-
tion in the hands due to
vibrations. A general period of
use cannot be set, because
this depends on several influ-
encing factors:
Personal tendency to suffer
from poor circulation (fre-
quently cold fingers, tingling
sensation in the fingers)
Low ambient temperature.
Wear warm gloves to protect
your hands.
Holding the device too tightly
hindering blood circulation.
Continuous operation is more
harmful than operation inter-
rupted by work breaks.
You should see a doctor if us-
ing the device regularly and for
lengthy periods of time, and in
English