Tabla de contenido
Publicidad
20
17.1
17.2
Attaching the seat unit to your
chassis
WARNING: ENSURE ALL
LOCKING DEVICES ARE
ENGAGED BEFORE USE.
To attach your Pioneer seat
17.1
unit to the Pioneer chassis
hold the seat unit above the
chassis. Locate the seat unit
chassis connector posts into
the seat attachment slots on
the chassis. Ensure that the
seat unit 'clicks' into place.
The seat unit can be fitted
forward or rearward facing.
Lift the seat unit gently by the
bumper bar to check the seat
unit has locked into place.
To adjust the seat position
(see
)
18.1
Detaching the seat unit from
your chassis
With the seat unit facing you,
17.2
pull both seat release handles
outwards and lift the seat unit
clear of the chassis.
CAUTION: Remove the child from
the seat unit before detaching
from your chassis.
18.1
18.2
Adjusting the seat position
Your Pioneer has 3 forward-facing
and 3 rearward-facing seat
positions.
To adjust the seat position in
18.1
either forward or rearward
facing mode, lift and hold the
seat recline adjustment lever
on the back of the seat unit.
Move the seat unit upwards or
downwards to upright, semi-
recline or full recline.
Release the recline adjustment
lever and wait to hear a
'click' for each position to
lock into place.
Your Pioneer has an adjustable
18.2
multi-position footrest.
To adjust the footrest, press
the adjuster buttons located
on each side of the footrest.
Once buttons are pressed
gently adjust the footrest to
its lowest position. Once in the
lowest position you can gently
lift the footrest up to a more
desired position if required.
silvercrossbaby.com
21
Publicidad
Tabla de contenido
