Tabla de contenido
Publicidad
8
6.3
Folding your Pioneer chassis
Press and hold the fold release
6.3
button. Pull the fold release
triggers towards you. Push the
handle downwards gently and
lower the handle downwards
until the fold lock engages. Lift
the handle upwards gently to
ensure that the chassis is folded
correctly.
To release the rear wheels,
6.4
press and hold the green button
under the brake and gently pull
wheel away from chassis.
WARNING: TO AVOID POSSIBLE
INJURY OR DAMAGE, ALWAYS
ENSURE THE STORAGE LATCH HAS
BEEN ENGAGED BEFORE LIFTING
THE PRAM/STROLLER.
CARRY THE PRAM USING THE
MAIN HANDLE, ONCE STORAGE
LATCH HAS BEEN ENGAGED.
WARNING: DUE CARE SHOULD
BE TAKEN WHEN FOLDING AND
UNFOLDING THIS PUSHCHAIR.
PLEASE ENSURE FOLDING
MECHANISMS ARE KEPT CLEAR
TO AVOID POSSIBLE FINGER
ENTRAPMENTS OR INJURIES TO
PARTS OF THE BODY.
6.4
X2
7.1
7.2
7.3
7.4
Using your Pioneer from birth
with the carrycot
Preparing the carrycot for use
Remove all packaging material
from your Pioneer carrycot.
First erect the carrycot outer.
7.1
Lay the carrycot outer down
onto its base. Press the 2x
metal bars into the locators
on internal base of carrycot.
A small groove in the locator
holds the frame in position.
Attach the carrycot liner to
7.2
the carrycot outer. Fasten
each inner zip. There is one at
each end of the liner.
Pass the two D-shaped parts
7.3
of the liner between the liner
and the outer and fasten the
Velcro patches to secure the
liner in place.
Place the mattress into the
7.4
base of the liner.
WARNING: DO NOT LEAVE YOUR
CHILD UNATTENDED.
WARNING: NEVER USE THE
CARRYCOT ON A STAND.
WARNING: DO NOT LET OTHER
CHILDREN PLAY UNATTENDED
NEAR THE CARRYCOT.
CAUTION: Do not force the zip
silvercrossbaby.com
9
Publicidad
Tabla de contenido
