Technical Data; Noise Information; Vibration Information - Worx WX623 Manual Del Usuario

TECHNICAL DATA

Type wx623 wx623.1(620-629-designation of machinery, representative of Planer)
Rated voltage
Rated power
Rated no load speed
Protection class
Max cutting depth
Max rebating depth
Max cutting width
Machine weight

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K &K
PA WA
Wear ear protection when sound pressure is over

VIbRATION INFORMATION

Vibration total values (triax vector sum) determined according to EN 60745
Typical weighted vibration
wARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on the
following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed.
wARNING: To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool
is switched off and when it is running idle but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Planer
Vibration emission value a
Uncertainty K=1.5m/s²
220-240V~50/60Hz
950W
14500/min
/II
3mm
20mm
82mm
3.5kg
L : 91dB(A)
PA
L : 102dB(A)
WA
3.0dB(A)
80dB(A)
=5.6m/s
2
h
EN
7 7