Extension Cords - Ryobi EMS-2026SCL Manual De Utilización

GB
F D
MAINTENANCE

EXTENSION CORDS

The use of any extension cord will cause some loss of
power. To keep power loss to a minimum and to prevent
tool overheating, use an extension cord that is heavy
enough to carry the current the tool will draw. When
working outdoors, use an extension cord that is suitable
for outdoor use.
WARNING
Keep extension cords away from the cutting area
and position the cord so that it will not get caught
on timber, tools, etc. during cutting operation.
WARNING
Check extension cords before each use.
If damaged, replace immediately. Never use
tool with a damaged cord since touching the
damaged area could cause electrical shock
resulting in serious injury.
E I P NL S DK N FIN
English
WARNING
Always wear safety goggles or safety glasses
with side shields during power tool operation
or when blowing dust. If operation is dusty,
also wear a dust mask.
If the supply cord is damaged, it shall be replaced by
■
the authorised Ryobi service centre in order to avoid
a hazard.
If the supply cable is damaged, disconnect it from the
■
supply immediately.
Take care not to expose this tool to rain.
■
Due to Ryobi's continued product refinement policy,
■
product features and specifications can and will
change without notice. Check current features and
specifications with your Ryobi retailer.
23
GR H CZ RUS RO PL