Important Safety Instructions; Getting To Know Your Machine; Front View - Euro-Pro Operating Dressmaker 970C Manual Del Propietário

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, safety precautions should always be followed,
including the following:
Read all instructions before using this sewing machine.
- To reduce the risk of electric
Danger
shock:
1. An appliance should never be left
unattended when plugged in or with
batteries in place.
2. Always unplug this appliance from
the electrical outlet and/or remove
batteries immediately after using
and before cleaning.
- To reduce the risk of burns,
Warning
fire, electric shock, or injury to persons:
1. Do not allow to be used as a toy.
Close attention is necessary
when this appliance is used by or
near children.
2. Use this appliance only for its
intended use as described in this
manual. Use only attachments
recommended by the manufacturer
as contained in this manual.
3. Never operate this appliance if it
has a damaged cord or plug, if it is
not working properly, if it has been
dropped or damaged, or dropped
into water. Return the appliance to
EURO-PRO Operating LLC for
examination, repair, electrical or
mechanical adjustment.
4. Never operate the appliance with
any air openings blocked. Keep
ventilation openings of the sewing
machine and foot control free from
accumulation of lint, dust and loose
cloth.
SAVE THESE INSTRUCTIONS
This sewing machine is intended for household use only.
5. Keep fingers away from all moving
parts. Special care is required
around the sewing machine
needle.
6. Always use the proper needle
plate. The wrong plate can cause
the needle to break.
7. Do not use bent needles.
8. Do not push or pull fabric while
stitching. It may deflect the needle
causing it to break.
9. Switch the sewing machine off
when making any adjustments in
the needle area, such as threading
needle, changing needle,
threading bobbin or changing
presser foot.
10. Always unplug sewing machine
from electrical outlet when
removing covers, lubricating or
when making any other user
servicing adjustments mentioned
in the instruction manual.
11. Never drop or insert any object
into any opening.
12. Do not use outdoors.
13. Do not operate where aerosol
(spray products) are being used or
where oxygen is being
administered.
14. To disconnect, turn all controls to
the off position, then remove plug
from outlet.
15. Do not unplug by pulling on cord.
To unplug, grasp the plug, not the
cord.
Rev. 07/08
1

1. Getting to know your machine

Front view

1. Upper Bobbin
2. Bobbin Winding Spindle
3. Hand Wheel
4. Take Up Lever
5. Light Switch
6. Speed Button
7. On/Off Button
Illustrations may differ from actual product.
8. Bobbin Cover
9. Bottom Bobbin
10. Needle Clamp Screw
11. Light
12. Thread Tension Release
Disk
13. Tension Dial
14. Needle Bar
2