Rear View; Connecting The Machine To The Power Supply - Euro-Pro Operating Dressmaker 970C Manual Del Propietário

Rear view

1. Bobbin Spool Pin
2. Thread Cutter
3. Presser Foot Lifter
4. Threading Guide
Accessories
Foot controller
Needle
Needle threader
Bobbin winding
spindle
5. Needle
6. Presser Foot
7. AC/DC Receptacle
8. Foot Control Receptacle
Long spool
pin
Threaded
bobbins (x2)
Empty
bobbins (x2)
3

2. Connecting the machine to the power supply

Using the sewing machine with the power cord:
1. Connect plug "A" to the AC/DC receptacle on the sewing machine and plug "B"
to the electrical outlet.
2. Push the ON/Off button in to turn the machine "On".
3. Connect the foot control "C" to the Foot Control Receptacle on the machine.
4. The sewing machine can be controlled by applying pressure to the foot control.
Always turn the sewing machine "Off" and unplug from the electrical
CAUTION:
outlet when the machine is not in use.
Using the sewing machine with batteries:
1. Open the battery compartment cover that is on the bottom of the sewing
machine.
2. Insert 4 "AA" alkaline batteries making sure that the batteries are in the correct
position as marked on the inside of the battery compartment.
3. Replace the battery compartment cover.
Make sure that the On/Off button is in the "Off" position when changing
CAUTION:
or inserting batteries. If the machine is in the "On" position, it will start to sew when
the batteries are inserted and may cause injuries.
4