Charging the Battery in WWC 1000
To charge the Lithium-Ion battery in the WWC 1000:
1. Place the WWC 1000 in the cradle as shown below:
2. The cradle's CHARGING light illuminates (RED) if
the WWC 1000 is properly seated and the battery is
charging.
3. The battery requires approximately 2 hours to charge
fully. The CHARGING light changes to GREEN
when the battery is fully charged.
4. To remove the WWC 1000 from the cradle, tilt the
WWC 1000 upward and pull out.
For more information on the CS 1000 Cradle, refer to
the CS 1000 4-Slot Cradle QRG, p/n 70-17661-0X.
5