Publicidad
Idiomas disponibles
Idiomas disponibles
33. Remove fasteners supporting the vapor canister
next to the storage bin. Lower the canister and
support it using bungee cords or other similar
method.
34. Lower the vehicle.
35. Using the pilot hole as a guide, drill a
41 mm (1 5/8”) hole (1) using a hole saw (2)
in the driver side of the rear storage bin.
36. After drilling, deburr the hole and apply
anti-corrosive protectant to bare metal surfaces.
37. Raise the vehicle.
38. Reinstall the vapor canister.
7-28-15
www.mopar.com
9
Publicidad
