Front Panel - Air Live WL-5450AP Guia De Inicio Rapido

Important Information
The AP mode's default IP address is 192.168.100.252
The default Subnet Mask is 255.255.255.0
The default SSID is airlive
The default Channel is 11
The default DHCP client is Disabled
The default is set to AP mode
This Wireless Access Point can support four modes AP,Client, Bridge, Repeater (WDS)
If you want to change to Repeater mode, please go to Status> WDS Setting to enable the WDS function
Under Bridge Mode, you can set WEP Key or WPA in order to prevent unrelated people to eavesdrop.
GPL Compliance: Part of the device's firmware use GPL licensed code. There is no warranty for the GPL
software. You can get a copy of the GPL source code from our website at

Front Panel

WL-5450AP
http://www.airlive.com/gpl.htm
English
3