Cognex In-Sight VC200 Manual página 19

Connect the DS1000 Series Sensor
The sensor's 24VDC Power + I/O + Encoder connector provides access to power
and I/O connections. The DS1000 series sensor's Ethernet connector provides an
Ethernet connection.
WARNING: The DS1000 series sensors are designated as a Class 2M laser
product. These laser products can be hazardous. Please refer to the DS900
Series and DS1000 Series Sensor Reference Guide for important instructions
on their safe use.
CAUTION: Cognex recommends only cold-plugging the sensor; turn the
vision controller power off when connecting or disconnecting the sensor.
18