Cognex In-Sight VC200 Manual página 8

Installation
This section describes the connection of the vision controller to its standard and
optional components. For a complete list of options and accessories, contact your
Cognex sales representative.
Installation procedures and specifications are presented in detail in the In-Sight
VC200 Vision Controller Reference Guide.
Note: Cables are sold separately.
CAUTION: All cable connectors are "keyed" to fit the connectors on the vision
controller; do not force the connections or damage may occur.
Mount the Vision Controller
The vision controller provides mounting holes for attachment to either a bottom or
backside mounting surface.
Note: The vision controller may be optionally mounted using the accessory
wall mounting bracket (BKT-WALL-VC200-01) or to a 15mm DIN rail, using
the accessory DIN rail mounting bracket (BKT-DIN-VC200-01).The DIN rail
mounting bracket accessory is not suitable for a 7.5mm profile DIN rail. Please
contact your Cognex sales representative for more information.
7
®