Thrustmaster HOTAS Warthog Manual Del Usuario página 3

ENGLISH:
Bootloader method: How to wake your HOTAS Warthog if it is no longer
recognized on PC (i.e. in the event of firmware loss).
Required system: PC running Windows® 10, 8.1 or 7.
1)
Before beginning this procedure, be sure to have installed the latest HOTAS Warthog
driver package available on the support web site:
https://support.thrustmaster.com/en/product/hotaswarthog-en/
NOTE: During the installation process, you will be asked to connect your joystick/Throttle
to the USB port.
DO NOT CONNECT the device to the PC
Since your device will not be detected, the process may take a bit more time than usual.
PLEASE BE PATIENT until the operation is completed.
2)
Restart the computer.
For the following steps,
We advise against using a USB hub during this procedure.
and click NEXT.
connect the Joystick/Throttle directly to the PC's USB port.