Ryobi RY36BPXA Traducción De Las Instrucciones Originales página 4

BATTERY TOOL USE AND CARE
Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury
and fire.
When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects that can make a
connection from one terminal to another.
Shorting the battery
together may cause burns or a fire.
Under abusive conditions, liquid may
be ejected from the battery pack; avoid
contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid
ejected from the battery pack may cause
irritation or burns.
Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries may
behaviour resulting in fire, explosion, or
risk of injury.
Do not expose a battery pack or tool to fire
or excessive temperatures. Exposure to
fire or excessive temperature above 130°C
may cause explosion.
Follow all charging instructions and do not
charge the battery pack or tool outside
the temperature range specified in the
instructions. Charging improperly or at
temperatures outside the specified range
may damage the battery and increase the
risk of fire.
OPERATION
Operate the product only at reasonable
hours—not early in the morning or late at
night when people might be disturbed.
Never operate the product in an explosive
atmosphere.
Avoid using the product in bad weather
conditions especially when there is a risk
of lightning.
2 | English
pack terminals
exhibit unpredictable
Keep bystanders, children, and pets 15 m
away from the area of operation. Stop the
product if anyone enters the area.
Do not operate the product in poor lighting.
The operator requires a clear view of the
work area to identify potential hazards.
Operating similar tools nearby increases
both the risk of hearing injury and the
potential for other persons to enter your
working area.
Always be sure of your footing on slopes.
Walk, never run. Do not use on a ladder,
rooftop, tree, or other unstable support.
Stable footing on a solid surface enables
better control of the blower in unexpected
situations.
Keep proper footing and balance. Do not
overreach. Overreaching can result in loss
of balance.
Never use the product with defective
guards or shields, or without safety devices
in place.
Do not modify the product in any way or
use parts and accessories that are not
recommended by the manufacturer.
WARNING
If the product is dropped, suffers heavy
impact, or begins to vibrate abnormally,
immediately stop the product and inspect
for damage or identify the cause of the
vibration. Any damage should be properly
repaired or replaced by an authorised
centre.
To reduce the risk of injury associated with
contacting rotating parts, always turn off
the product and remove the battery pack.
Make sure that all moving parts have come
to a complete stop:
– before leaving the product unattended
– before checking, cleaning, or working on
the product
– before inspecting the product after
striking a foreign object
– whenever the product starts to vibrate
abnormally (inspect immediately)