Steren STV-041 Manual De Instrucciones página 2

STV-041
1018A
25" to 50" TV Stand
INSTRUCTION MANUAL
V2.0 /0518A
Use the support and a leveler to make drilling marks on the surface
where you want to install. Then, drill and install the screws as shown in
the picture.
√
A) INSTALLATION in concrete
B
I
Wall of concrete
A
IMPORTANT
Before using the product, read this instruction carefully to avoid any malfunction.
The information presented serves only as a reference for the product. Due to
updates there may be differences. See our website www.steren.com for the latest
version of this manual.
This device is not intended for use by persons (including children), whose
physical, sensory or mental abilities are different or reduced, or lack experience
or knowledge.
• Children should be supervised to ensure they do not use the device as a toy.
This product is designed for indoor use.
Choose a solid surface to be able to securely fix the support
V0.0
• Do not exceed the maximum load capacity (25 kg).
INSTALLATION in wood
B)
Wooden wall
I
Place the grab bars on the back of the screen. Choose 4 screws, 4
bushings and 4 washers to secure the bars firmly.
CONTENT
Install the screen on the stand.
security screws to mount the screen without
difficulties.
A
E
F o G
C o D
Concrete screw
A(4 piezas)
M8 * 18 mm
E (4 pieces)
Support
Clamping bars
(Loosen the
H
Set
SCREWS AND RONDANES KIT
Anchors
M4 * 30 mm M6 * 30 mm
B(4 piezas)
C ( 4 piezas) D ( 4 piezas)
M5 Washers M6 Washers
M5 * 35 Screw
F (4 pieces) G (4 pieces
of security
H (2 pieces)
Drop Leveler
I (1 piece)
TOOLS NEEDED
Not included
Customer Care Center
01 800 500 9000