Transport And Storage; Troubleshooting - Wolf Garten LYCOS E/700 H Manual De Instrucciones

EN

Transport and storage

Risk of injuries due to the cutting tool.
¾ Before transport or storage, switch off
the device and wait until the cutting tool
comes to a standstill.
¾ Mount the protective cover onto the
cutting blade.
Storage
Only transport and store the hedge trimmer with
its protective cover G [12] mounted on the cutting
blade.
• For optimum storage the hedge trimmer can be
attached to the wall F 1 .
Thoroughly clean your device at the end of each
Î
season.
Risk of injuries or material damage
¾ In case of doubt always take your mower to a specialist workshop.
¾ Switch the device off before any inspection or before working on the blades.
Problem Possible cause
Motor does not run No mains supply
Cable damage:
Attention! Electric shock due to cable damage A
fuse/circuit breaker will not always blow/trip if the
cable is cut through or damaged.
Do not touch the cable before the mains plug
has been pulled out of the socket.
The cutting blade The cutting blade is blunt.
becomes hot.
There is a lot of friction because of a lack of
lubrication.
Uneven running, The cutting blade is damaged.
severe vibration of
The cutting blade fastening has come loose.
the hedge trimmer.
26
WARNING!
Always store the device in a dry and safe location
Î
that is inaccessible to children.
Keep the hedge trimmer and especially its plastic
Î
components away from brake fluids, petrol,
mineral oil containing products, penetrating oils
etc. They contain chemical substances that can
damage, attack or destroy the plastic components
of the hedge trimmer.
Fertilizers and other garden chemicals contain
Î
substances that may have a highly corrosive
effect on the metal parts of the hedge trimmer.
Therefore do not store your hedge trimmer in the
vicinity of these substances.

Troubleshooting

WARNING!
Remedy
Check the power supply and if necessary
contact an electrician to arrange repair.
Arrange for complete replacement of the
damage cable by a workshop. Repair
of the cable using insulating tape is
forbidden.
Consult a specialist workshop.
Oil the cutting blade.
Consult a specialist workshop.
Consult a specialist workshop.
Transport and storage