Aqua Marina BE-412 Guia Del Usuario página 16

KAYAK PADDLE (* Optional for STEAM )
Blade
RIPPLE-TECH PADDLE (Only for RIPPLE )
Blade
Canoe Paddle
①
Kayak Paddle
②
KAYAK PADDLE ASSEMBLY
1. Press and align the push-bottom on the paddle blade with the short shaft hole, ensure the
push-bottom is securely snapped into the short shaft hole.
2. Join the 2 shafts together by pressing and aligning the push-bottom securely snapped into
the hole.
3. To disassemble, reverse the assembly steps.
Note: it is not necessary to detach the paddle blades from the shafts.
NOTE: ALWAYS DRAIN THE WATER LEFT IN THE PADDLE SHAFT AFTER EACH USE.
PADDLE ASSEMBLY
Shaft
Shaft
16
Shaft
①
Shaft
②
Blade
Blade