Device elements
1 Fleece filter bag
2 Suction support
3 Suction hose
4 Nameplate
5 Cable hook
6 Carrying handle
7 Power cord
8 Suction head
9 Suction head lock
10 Impeller
11 Steering roller
12 Dirt receptacle
13 Socket for electric vacuum brush
14 Main switch
15 Switch between hard surface/carpet
16 Floor nozzle
17 Suction pipe
18 Mains plug holder
19 Pickup for floor nozzle
20 Lid lock
21 Cover
22 Suction force regulator (continuous)
23 Bender
24 Exhaust filter
25 Filter casing
26 Main filter basket
27 Motor filter
28 Grid of the motor proction filter
Start up
The appliance can be operated in 2 ways:
1 Operation with fleece filter bag or paper filter
bag (option)
2 Operation without filter bag
Check whether main filter basket has been in-
serted into the appliance.
Installation of the filter bag
Release and remove the suction head.
Remove the main filter basket.
Install the fleece filter bag or the paper filter
bag (option).
Insert main filter basket.
Insert and lock the suction head.
Operation
Turning on the Appliance
Plug in the main plug.
Switch on the appliance at the main switch.
Cleaning operations
Set the selection switch of the floor nozzle to
hard surface or carpet.
Regulate the suction force on the suction force
regulator (continuous).
Perform the cleaning operation.
Turn off the appliance
Switch off the appliance at the main switch.
Pull out the mains plug.
After each operation
Empty the container.
Vacuum and wipe the appliance inside and
outside with a damp cloth.
Transport
Caution
Risk of injury and damage! Observe the
weight of the appliance when you trans-
port it.
When transporting in vehicles, secure the ap-
pliance according to the guidelines from slip-
ping and tipping over.
Storage
Caution
Risk of injury and damage! Note the
weight of the appliance in case of stor-
age.
This appliance must only be stored in interior
rooms.
2
11