Simulator; Languages - Plastimo ECHOFISH 820 Manual De Instalación Y Funcionamiento

2) Use the Up/Down Arrow to select System option.
3) Press Right Arrow to enter into System setting.
4) Use the Up/Down Arrow to select the Beeper option.
5) Press Right Arrow to enter into the setting.
6) Press Up/Down Arrow to change the option.
7) Press ENT to confirm the setting.

15. Simulator

Simulator aims at helping you to understand better your
fishfinder. Under simulator mode, it is always possible
to change settings in order to view different sonar im-
age.
To set the Simulator:
1) Press MENU to enter into menu setting.
2) Use the Up/Down Arrow to select System option.
3) Press Right Arrow to enter into System setting.
4) Use the Up/Down Arrow to select the Simulator op-
tion.
5) Press Right Arrow to enter into the setting.
6) Press Up/Down Arrow to change the option.
7) Press ENT to confirm the setting.
8) Press EXIT to exit the menu setting.

16. Languages

35
Echofish 820 – Installation & Operation manual