Transducer Installation; Transom Installation - Plastimo ECHOFISH 820 Manual De Instalación Y Funcionamiento

A- Display unit
B- Bracket
C- Transducer
D- Pivot
E- Template
F- Locking bolt
G- Pivot bolt
H- Pivot nut
I- 4x15mm screws
J- 3x20mm screws

Transducer installation

1. Transom installation

1.1 Select the mounting location
When choosing the transducer mounting location, do not
forget to consider the flowing as well. The sonar transmis-
sion/reception can be affected severely in turbulent waters.
Never mount the transducer behind rows of rivet, water in-
take, discharge port, propeller area, etc. These areas can
create turbulences when the boat moves a t a high speed.
1.2 Mark the location and drill the mounting holes
Make sure the boat is flush and parallel with the water sur-
face.
Hold the template against the transom of the boat, mark
Echofish 820 – Installation & Operation manual
7