Preface; Package Content; Connection; Navigating - Euromate PURE AIR Touch Control Instrucciones Para El Uso

1

PREFACE

Thank you for purchasing this device.
Please read this manual carefully before using the product and keep it in a
safe place for future use. To ensure continuous safe, correct operation, we
recommend that you have the product serviced regularly. Our service
department can help you with this.
We hope you will enjoy the product for many years to come.
Use of the manual
This manual is intended as a reference, to enable professional, trained,
authorised users to safely operate the product shown on the front of
this document.
Manufacturer's liability
Our products are manufactured in conformity with the requirements of the
various applicable directives and are therefore accompanied by the
necessary documents. We make continuous improvements in the interest of
the quality of our products and therefore reserve the right to change the
specifications shown in this document.As the manufacturer, we are not liable
in the following cases:
• Failure to comply with the installation instructions for the device
• Failure to comply with the operating instructions for the device
• Deficient or insufficient maintenance of the device
User's liability
To ensure that the unit functions properly, please do all of the following:
• Read and observe the instructions in the manuals supplied with
the device.
• Seek the assistance of an approved installer for the installation and
initial commissioning.
• Ask the installer for an explanation of your installation. Have the
necessary inspections and maintenance performed by an
approved installer.
• Keep the manuals in good condition and close to the device.
2

PACKAGE CONTENT

The Touch Control package includes:
A Touch Control
B Mounting hardware
C User manual
3

CONNECTION

WARNING
- The Touch Control is intended for indoor use and not in a
hazardous or outdoor environment.
- Avoid installation in areas where vapours, gases, oils,
lubricants, chemicals etc. are present.
- Install the Touch Control at a suitable height and location that
is easily accessible to operators.
- Use the proper cables and connect them correctly to earth
before you connect mains power to the Touch Control.
- Improper installation voids the warranty.
System connection diagram
Touch Control
10
4

NAVIGATING

Press the icon with the up arrow to go up a level.
Press the icon with the down arrow to go to the next screen.
Press the icon with the circular arrow to go back to the
home screen.
5

TOUCH CONTROL START-UP

Start-up screen
6

CONNECTION INDICATORS

This shows the connections available to
the Touch Control.
Indicates that a GSM modem is installed. This is configured in the
SERVICE menu and is not a user-adjustable setting. If the icon is
not shown among the connections, no modem is installed.
Indicates the communication is via a wired connection. This is the
most reliable type of connection and is not affected by changes
in/to the building after the DFI units have been installed.
Indicates the communication is via a wireless connection. The
wireless connection is affected by changes in/to the building.
For example, the installation of electrical equipment or
scaffolding will affect the connection. Contact Euromate to
discuss the option.
This symbol indicates that the Touch Control is locked and
therefore not operable.