URBANGLIDE Quad 4.0 Manual Del Usuario página 12

Problem
The quad does not
work
The quad does not
work long
The quad suddenly
stopped working
The quad makes
strange noises when
the engine is running
The quad moves
slowly
Troubleshooting
Possible Cause
The battery is discharged.
Connections or cables are disconnected.
The battery needs to be charged.
The battery does not charge fully.
The brakes are not properly adjusted
Tires are not properly inflated
Overload, cut-off
Grilled fuse
The chain is struggling to work
The brakes are not properly adjusted
The quad has overloaded
Bad driving condition
Tires are not properly inflated
Solution
Charge the battery, 14h may be
necessary.
Check that the battery is firmly seated in
the quad.
Charge the battery, 14h may be
necessary. Check that the battery is fully
engaged in the quad.
Make sure the power flow is well
connected.
The battery may need to be changed.
Follow the instructions on page 9.
Follow the instructions on page 6.
Overloading can lead to system
shutdown. Turn off the quad, wait 15
seconds, then turn it on again.
Overloading can burn fuses, so you have
to change them. For this, contact the
after-sales service. Check before the
status of all connectors and cables.
Apply lubricant to the chain.
Follow the instructions on page 9.
Make sure the person on it weighs less
than 54kg.
Check that there are no objects
obstructing the proper operation of the
quad.
Make sure you are on flat, dry, and
constant ground.
Follow the instructions on page 6.
12