URBANGLIDE Quad 4.0 Manual Del Usuario página 9

CAUTION: Turn off the quad before handling the following parts.
Adjust the brakes (10min)
Loosen
Tighten
1. To adjust the brake cable,
unscrew the small black portion on
the brake until you reach the
desired fit.
CAUTION: If the brakes are not properly installed, they may block or damage your wheels and tires.
Always check before using the quad, that the brakes do not rub on anything.
Practice in an open area to use your brakes, to familiarize yourself with stopping your quad.
Maintenance and reparation
2. If you have trouble screwing or
unscrewing, you can use the 10mm
wrench. Make sure the nut is tight
once the adjustment is made.
3. Check that the brake is properly
adjusted without friction. You can adjust
the brake concentration by turning the
nut as shown in the picture.
9