Mounting And Installation - Samoa 363 100 Guía De Servicio Técnico Y Recambio

MOUNTING AND INSTALLATION

Fig. 1
Fig. 2
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
• To ensure the sealing, mount the extension outlet using
• Attach the swivel cover to the house before installing
Fig. 3 • The swivel cover is compatible with 1/2" hoses, either
• Depending on the type of terminal hose may be
• To connect the gun to the network, keep fixed the gun
1
2
• A flow meter can be attached to the gun by means of
• Employ a 24 x 2 mm size o-ring (1) and two M5 x 14
the provided o-ring, taking care that the position of the
o-ring in the flange housing is correct. Lubricate the
o-ring before mounting (fig. 4).
the oil gun in the system.
with male fixed terminal or swivel nut (fig. 1).
necessary to open the end of the swivel cover to allow
its passage through the hose. The swivel cover has a slot
at its end for easy opening (fig. 2).
body and the end of the hose while rotate the free end
of the swivel to achieve the desired torque (fig. 3).
the flange.
screws (2) for mounting.
EN
Fig. 4
3
R. 07/19 836 829