Promise Technology VessRAID 1000f Serie Guia De Inicio Rapido página 36

VessRAID 1000f, 1000i, 1000s Series Quick Start Guide
Setting up with the CLU
1. At the administrator@cli> prompt, type menu and press Enter.
The CLU main menu appears.
Figure 34.CLU main menu
With Quick Setup highlighted, press Enter.
2.
The first Quick Setup screen enables you to make Date and Time settings.
Setting system date and time
To make date and time settings:
1. Press the arrow keys to highlight System Date .
2. Press the backspace key to erase the current date.
3. Type the new date.
4. Follow the same procedure to set the System Time.
5. Press Ctrl-A to save these settings and move to the Management Port
configuration screen.
Making Manual IP Settings
To make Management Port and iSCSI Port settings manually:
1. Press the arrow keys to highlight IP Address .
2. Press the backspace key to erase the current IP Address.
36