Promise Technology VessRAID 1000f Serie Guia De Inicio Rapido página 42

VessRAID 1000f, 1000i, 1000s Series Quick Start Guide
Figure 37.Clicking "Language" on the WebPAM PROe Header
Creating Your Logical Drives
On a newly activated VessRAID subsystem, there are no disk arrays or logical
drives. To create a logical drive:
1. Click the Disk Arrays
The Array Configuration menu appears.
Figure 38.The Array Configuration menu
2. Choose one of the options:
• Automatic – Creates a new disk array following a default set of
parameters. Makes one logical drive automatically. Also makes a hot
spare drive for all RAID levels except RAID 0, if at least four
unconfigured physical drives are available. See page 43.
• Express – You choose the parameters for a new disk array by
specifying the characteristics you want. You can create multiple logical
drives at the same time, however they will all be identical. You can
choose to make a hot spare drive for all RAID levels except RAID 0, if at
least four unconfigured physical drives are available. See page 43.
• Advanced – You directly specify all parameters for a new disk array.
Makes one logical drive automatically. You can create additional logical
drives at a later time, if additional configurable capacity is available.
Does not make a hot spare drive. See page 44.
3. Click the Next button.
icon, then click the Create tab.
42