Connection Options; Connecting A (Bass) Guitar; Battery Compartment - Behringer ULTRA-DI DI20 Manual Del Usuario

4
ULTRA-DI DI20
By using the GROUND switch, you can interrupt (LIFT) the
(8)
grounding between the input and output. Depending on how
other devices connected to your DI-box are grounded, ground
loops can be eliminated.
◊ ◊
Never connect pin 2 or pin 3 to pin 1! Never remove the
screen protection on pin 1. Otherwise, you won't be
able to run the DI20 on phantom power (for example,
phantom power from a mixing console).

Battery compartment

To access the battery compartment, loosen the screw on the rear.

3. Connection Options

3.1 Connecting a (bass) guitar
In
ULTRA-DI DI20
Link Out
EURORACK
UB2222FX-PRO
Fig. 3.1: Guitar DI-box guitar amp/mixing console
This illustration shows the standard application of a DI-box. The signal
is fed unbalanced to a guitar amp and balanced to a mixing console
(LINK mode). This application has advantages when used with
bass guitars, because very few microphones are able to pick up low
frequencies at high levels.
ULTRA-DI DI20
Out
5