Charger unit
item no. 605017
Only for 7.2V NiMH battery packs
2500 - 4500 mAh
Input voltage 230V ~ 60 Hz
Input power 56W (max)
Output: 7.2V = 4A
Safety instructions
Please read the operating instructions before using the unit for the first time.
Only use the unit in enclosed spaces.
Ensure the unit and battery are well ventilated.
If the battery should become very hot (>40°C, battery poss. defective), disconnect
from the power supply.
Do not leave the unit unattended for long periods.
Do not allow the unit to run for hours on trickle charge.
Charging procedure
Connect battery to plug, pay attention to the connector shape, do not apply force.
Insert the connector in the power outlet, LED will light up red: the battery is charging.
Charge time, depending on battery capacity, approx
LED will light up green, battery is fully charged.
Charger goes on to trickle charge pulsating at 1.5A.
Disconnect battery from charge connector and leave to cool down.
Disposal
Please note and understand the symbols on this product, packaging or
instructions. Electronic components are valuable materials and at the end
of their useful life should not be disposed with household waste! Help us to
protect the environment and safeguard our resources by discarding this
equipment at a dedicated recycling point. The authority responsible for
waste disposal or your retailer will be able to answer any questions you
may have in this respect.
Service-Hotline:
(8.00 Uhr -17.00 Uhr)
(01805) 73 33 00
12 ct/min
WARNING:Explosive gases, prevent flames and sparks before charging study instruction sheet.
WARNING:Explosive gases, prevent flames and sparks before charging study instruction sheet.
Disconnect supply before making or breaking battery connection. Provide for good ventilation
Disconnect supply before making or breaking battery connection. Provide for good ventilation
Charging for 7.2V 2500-4500mAh Ni-Mh battery packs only. For indoor use only.
Charging for 7.2V 2500-4500mAh Ni-Mh battery packs only. For indoor use only.
4A BATTERY CHARGER
4A BATTERY CHARGER
Model: 605017
Model: 605017
Input: 230V AC 50Hz 56W(max)
Input: 230V AC 50Hz 56W(max)
Output: 7.2V DC 4A
Output: 7.2V DC 4A
Polarity:
Polarity:
. ¾ to 1½
hours.
Dickie-Tamiya GmbH & Co KG
Mittlere Motsch Str. 9
96515 Sonneberg