Mixcder TR008 Manual De Instrucciones página 7

- Turn the toggle switch to the "TX" position. The TR008 will be
in a wireless transmitter mode.
- Power on: Press the switch button for about 3 seconds, then
the blue LED on the top of unit will flash slowly, it comes to standby.
- Power off: Press the switch button for about 3 seconds, the
blue LED on the top of unit will turn off.
- Prior to first use the TR008 must be paired with at least one
headphone, speaker , or other wireless audio receiver.
- Make sure your wireless device is turned off and within 1
meter(3 feet) of the TR008.Put it in pairing mode (consult the
user's manual of the device if you are not sure how to enter
pairing mode).
- Once the headphone or speaker is in pairing mode, press
pairing button located on the side of the TR008. A blue light will
blink rapidly on the top of the unit to indicate that the TR008 is
ready to pair. Once theTR008 and the device you are pairing
with it are both in pairing mode simultaneously, they will
automatically pair. Once paired, the light on top of the TR008
will turn solid blue.
OPTIONAL: PAIRING A SECOND HEADPHONE OR
SPEAKER
The TR008 can stream audio to two wireless headphones or
speakers simultaneously. A second headphone or speaker
can be paired after one is already connected (as indicated by
a solid blue light on top of the unit). To pair the second device,
put it in pairing mode and then press pairing button on the
TR008 for about 5 seconds, a green light will flash to indicate
that the TR008 is in pairing mode, once a second headphone
or speaker paired, then turn to solid green.
light
blinks
EN-6
solid
light