Mixcder TR008 Manual De Instrucciones página 9

Connect with the device which you want to play the files,
see the RX receiver Mode picture below:
Note: RX Receiver Mode can only pair with a mobile phone or
tablet.
RX Mode Function
Pairing with Moblie phone /Tablet
- Turn the toggle switch to the "RX" position. The TR008 will be
in a wireless receiver mode.
- Power on: Press the switch button for about 3 seconds, then
the red LED on the top of unit will flash slowly, it comes to
standby.
- Power off: Press the switch button for about 3 seconds, the
red LED on the top of unit will turn off.
- Make sure your wireless device is in 1 meter (3 feet) of the
TR008. Open the wireless function in settings, then search for
the TR008.
- Once mobile phone or tablet is in pairing mode, press pairing
button located on the side of the TR008. A red light will blink
rapidly on the top of the unit to indicate that the TR008 is ready
to pair. Once theTR008 and the device you are pairing with it
are both in pairing mode simultaneously, they will
automatically pair. Once paired, the light on top of the TR008
will turn solid red.
EN-8