Description Of Symbols; Environmental Protection - Silverline 263764 Manual De Instrucciones

GB
Introduction
Thank you for purchasing this Silverline tool. This manual contains information
necessary for safe and effective operation of this product. This product has
unique features and, even if you are familiar with similar products, it is necessary
to read this manual carefully to ensure you fully understand the instructions.
Ensure all users of the tool read and fully understand this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important
information about the product or instructions for its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Indoors use only!
T-130˚
DO NOT use in rain or damp environments!
Caution!
Risk of electrocution!
Conforms to relevant legislation and safety standards

Environmental Protection

Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist. Check with your local
authority or retailer for recycling advice.
V Volts
~
Alternating current
A Ampere
Hz Hertz
W, kW
Watt, kilowatt
A Amp hour
h
4
Original Instructions
Specification
Input voltage range ........................................ 11-15V DC
Input current .................................................. 70A (140A peak, one
..................................................................... second)
Output voltage ............................................... 230V~,50Hz
Waveform ...................................................... Modified sine
Mains socket: ................................................ Universal
Max continuous output power. ....................... 700W
Surge capacity/time ....................................... 1400W for one second
Efficiency ....................................................... >88%
No load current draw ..................................... <0.6A
Low voltage alarm ......................................... 10.5±0.5V
Low voltage shutdown ................................... 10±0.5V
Fuse (12V): ..................................................... 40A, blade type
Reccomended ambient temperature.............. 10-27 °C
Protection features ........................................ Input over voltage (16V)
Maximum working temperature .................... 65°C
Dimensions (H x L x W): ................................. 60 x 205 x 105mm
Weight: .......................................................... 0.95kg
As part of our ongoing product development, specifications of Silverline products may
alter without notice.
Input low voltage
Output overload
Output short-circuit
Overheat (65˚C)