Description Of Symbols; General Safety - Silverline 204757 Manual De Instrucciones

GB
Introduction
Thank you for purchasing this Silverline tool. This manual contains information
necessary for safe and effective operation of this product. This product has
unique features and, even if you are familiar with similar products, it is necessary
to read this manual carefully to ensure you fully understand the instructions.
Ensure all users of the tool read and fully understand this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Class I construction (protective earth
Risk of electrocution
Conforms to relevant legislation and safety standards
Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice
V
Volts
~ Alternating current
A Ampere
Hz
Hertz
W, kW Watt, kilowatt
Ah
Amp hour
4
Original Instructions
Specification
Input voltage range:..............................11 - 15V (12V) DC
Max input current: ................................30A, (60A peak, 1
............................................................second)
Output voltage: .....................................230V~±10%
Output frequency: .................................50Hz ±5%
Waveform: ............................................Modified Sine
Mains socket: .......................................Universal
Mains socket protection class: .............
Max continuous output power: .............300W (1.3A)
Surge capacity/time: ............................600W (2.6A) for one
............................................................second
USB port output: ...................................5V DC 500mA
Efficiency: .............................................>88%
No load current draw: ...........................<0.6A
Fuse: ....................................................35A
Low voltage alarm: ...............................10.5±0.5V
Low voltage shutdown: ........................10±0.5V
High voltage cut-off: .............................15.5±0.3V
Recommended ambient temperature: ..10-32°C
Protection features: ..............................Input over voltage
............................................................(15.5V)
............................................................Input low voltage
............................................................Output overload
............................................................Output short-circuit
............................................................Overheat (55˚C ± 5˚C)
Ingress protection: ................................IPX0
Direct battery connection: ....................0.6m (approx.)
Cigarette Lighter Plug: ..........................0.7m (approx.)
Dimensions (L x W x H): ........................155 x 105 x 60mm
Weight: .................................................0.65kg

General Safety

WARNING Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock, fire and/
or serious injury.
WARNING: This device is not intended for use by persons (including
children) with reduced, physical or mental capabilities or lack of
experience or knowledge unless they have been given supervision or
instruction concerning use of the device by a person responsible for
their safety. Children must be supervised to ensure that they do not play
with the device.
Save all warnings and instructions for future reference.
1) Work area safety
a) Do not operate electrical devices in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust. Electrical devices
create sparks which may ignite the dust or fumes.
2) Electrical safety
a) Electrical plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) devices.
Unmodified plugs and matching outlets will reduce risk of electric shock.