Using The Touch Screen; Inserting A Memory Card - Magellan MiVue 6 Serie Guia De Inicio Rapido

Using the touch screen

To operate your recorder, touch the screen with your fingertip. The device provides
the control buttons and system icons on the screen. Depending on your settings and
usage, the displayed buttons and icons may be different to provide various functions
and information of your device.
Example Button
Icon
/
5
Description
Tap to enter the Settings Menu.
Tap to manually enable Parking mode.
Tap to take a photo.
Tap to start recording.
Description
The REC icon blinks while recording is in
progress.
Displays the current time.
Recording with sound is enabled/
disabled.
The GPS signal icon indicates the GPS
status.
The Battery icon indicates the remaining
battery power.

Inserting a memory card

You must insert a memory card before you can start recording. Depending on the
model, your recorder may have two memory card slots. In this case always insert the
primary memory card into Slot 1 and then the second card (if available) into Slot 2.
The recorded files are stored to the card in Slot 1; the card in Slot 2 is for you to back
up files manually.
1. Hold the card by the edges and gently insert it into the slot with the label facing
the rear side of the recorder.
2. To remove card, gently push the top edge of the card inwards to release it, and
pull it out of the slot.
CAUTION:
ƒ DO NOT apply pressure to the center of the memory card.
ƒ Use a Class 10 memory card with at least 8GB capacity. The recorder supports
memory cards with up to 128GB capacity.
ƒ Magellan does not guarantee the product's compatibility with memory cards
from all manufacturers.
ƒ Before you start recording, please format the memory card to avoid
malfunction caused by files not created by the recorder. (Format by selecting
Settings Menu > Format).
ƒ Please turn the device off before removing the memory card.
6