Technical Specifications - Sinbo SHB 3098 Instrucciones De Uso

* After you finish your work, press the apparatus release button, rotate the hood (3) in
clockwise direction and pull out.
* Feed the food from the hopper plate. Only use the food pusher.
* After use, turn off the appliance or pull of the plug from the power source.
* Do not wash the metal parts of the appliance in a washing machine.
REVERSE OPERATION FUNCTION
* In case of any jamming or a need for reversing, place the ON/REV switch (14) in R (REV)
position and from the triple combination buttons at the top part of the appliance (13),
keep the REV button pressed.
* The feed screw shall be rotating in reverse direction and the hood shall be emptied.
* If this does not work, turn off the appliance and clean it.
CLEANING AND MAINTENANCE
DISASSEMBLY
CAUTION ! ! Before starting this process, make sure that you have pulled the plug of the
appliance.
* Make sure that the motor is at full stop.
* Pull off the electricity plug.
* Disassemble the hood of the appliance by applying the steps of assembly instructions
in reverse order.
* To easily remove the cutter plate, place a screwdriver between the plate and hood as
shown in the figure and then lift up.
CLEANING
* Remove any meat, etc. Wash each part with hot soapy water.
* A chlorinated whitening solution will cause discoloration at the aluminum surfaces.
* Do not immerse the motor body in water, only clean it with a damp cloth.
* Do not clean the body of the appliance with any substance (other than soap), otherwise
discoloration will occur.
* Clean all the cutter parts with a cloth dampened with water-vegetable oil.

TECHNICAL SPECIFICATIONS

• Reverse operation feature
• 3 pcs of stainless steel grinder plates
• Anti-slip pedestals
• High revolution motor protected against over-heating
• AC230V, 50Hz, 1800W
DESIGN ANF TECHNICAL SPECIFICATIONS CAN BE CHANGED WITHOUT PRIOR NOTICE!
- 9 -