Location Of Controls; Precautions For Use - Bigben TD012SPS Manual De Instrucciones

Ocultar thumbs Ver también para TD012SPS:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 5
Some records may not be read entirely if their recorded time is too long and if the
AUTO STOP function is ON. Please put this automatic system to OFF to read these

LOCATION OF CONTROLS

1. DUST COVER
2. LEFT SPEAKER
3. 3.5MM HEADPHONE JACK
4. POWER LED INDICATOR
5. POWER ON/OFF/ VOLUME KNOBS
6. RIGHT SPEAKER
7. SPINDLE ADAPTOR
8. 33/45 RPM SPEED SELECTOR
9. PICK-UP HOLDER
10. SPEAKER JACK (LEFT/ RIGHT)
11. AUTO STOP SWITCH
12. AC CORD
CAUTION:
Usage of controls or adjustments or performance of procedures other than those specified
herein may resulte in hazardous radiation exposure.
this unit should not be adjusted or repaired by anyone except qualified service personnel.

PRECAUTIONS FOR USE

Installation:
-
Unpack all parts and remove protective material.
-
Do not connect the unit to the mains before checking the mains voltage and before all
other connections have been made.
-
Do not cover any vents and make sure that there is a space of several centimeters around
the unit for ventilation.
Connection
Connect the power cord to ac outlet
1.
Switch on the system to and if the POWER LED indicator is on with red light, it's mean the
2.
power supply is normal. Now your system is ready to play the music.
Top cover assembly
Push the metal bracket to rear side
1.
Connect the metal bracket to the top cover
2.
Connect the hinge of the top cover to the main unit
3.
WARNING
records completely.
GB-1

Publicidad

Tabla de contenido
loading

Tabla de contenido