Solar Panel - Velleman SOL9 Manual Del Usuario

 waterproof (solar panel only)
 light with magnet base to stick on metal surfaces
 amorphous silicon solar cells
 5 powerful white diffuse 10 mm LEDs
 on/off switch
5. Overview
Refer to the illustrations on page 2 of this manual.
1

solar panel

2 solar panel mount
3 LED lamp
4 power input
6. Mounting
6.1 Solar Panel
 Choose a sunlit mounting area. Fix the panel to the surface with the
included screws. Use an appropriate screwdriver.
 The panel can be rotated over 360° and tilted to maximize its sun
exposure.
6.2 Lamp
 Choose an appropriate mounting area. Measure the distance between
the screw slots. Mark the distance onto the mounting surface.
 Drill holes using an appropriate power drill and insert a screw into each
hole. Insert a nylon plug (not incl.) if necessary.
 Secure the lamp to the screws.
 The lamp can also be fixed to a metal surface without using the screws
thanks to the magnetic base.
Remember to mount the panel and the lamp within each other's
reach, i.e. the length of the cable (± 2.5 m).
7. Operation
 Insert the power supply plug into the power input.
 Charge the lamp for a period of 14 hours prior to the first use.
 Turn the lamp on or off by means of the on/off switch. The lamp has an
operation span of four hours with fully-charged batteries.
V. 02 – 12/06/2015
SOL9
5 power supply plug
6 on/off switch
7 built-in magnets
8 mounting slots
4 ©Velleman nv