sunjoe 24V-SB10-CT Manual Del Operador página 11

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2. Place the safety guard over the motor housing as shown.
Align the holes. Fix with the original 4 safety guard screws.
Tighten to secure (Fig. 7).
Fig. 7
Installing the Storage Compartment
1. To store your grass blades easily, just simply snap the
storage compartment onto the pole of the trimmer and
edger. Be sure that the storage compartment is right side
up to prevent blades from falling out (Fig. 8).
Fig. 8
Storage
compartment
2. The trimmer plate (or SharperBlade
can be snapped directly onto the compartment for safe
storage, when not in use. (Fig. 9-10).
Fig. 9
Trimmer
plate
Safety guard
screws
Safety guard
Motor
housing
Pole
mini trimmer blade)
Storage
compartment
Pole
11
Fig. 10
SharperBlade
mini trimmer
blade
Installing + Changing SharperBlade™
mini trimmer blade
NOTE: When you first purchase your trimmer + edger,
the blade will come separately with the machine. Refer only to
the instructions for fitting the SharperBlade
you need to replace the blade in the future, follow all the steps
in this section.
1. Switch off the machine and remove the battery. Wait until
the machine comes to a complete stop.
2. Loosen the screw knob by screwing it counterclockwise.
Remove the screw knob to expose the worn blade and the
washer (Fig. 11).
Fig. 11
3. Assemble the new SharperBlade
trimmer + edger with the washer placed in the middle
(Fig. 11). Fix the whole assembly with the screw knob.
Twist clockwise to secure.
Installing + Changing Grass blade
NOTE: When you first purchase your trimmer + edger,
the blade will come separately with the machine. Refer only to
the instructions for fitting the grass blade (Step 2-3). Should
you need to replace the blade in the future, follow all the steps
in this section.
1. Switch off the machine and remove the battery. Wait until
the machine comes to a complete stop.
2. Place the large notch of the grass blade over the knob on
the trimmer plate (Fig. 12). Pull the grass blade until the
knob snaps into the small notch (Fig. 13).
Storage
compartment
Pole
(Step 3). Should
TM
Screw knob
Washer
SharperBlade
to the cordless grass

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido