sunjoe 24V-SB10-CT Manual Del Operador página 14

Fig. 21
Edging
m
WARNING!
Because this procedure is close to the
On/Off switch, make sure to remove the battery before
converting the machine.
1. To convert your SharperBlade
slide the Twist-N-Groom
twist the handle clockwise to an angle of 180° while
holding the pole. Release the collar and ensure it snaps
into place (Fig. 22).
Fig. 22
Twist 180°
2
clockwise
Twist-N-Groom
™
locking collar
trimmer into an edger,
™
locking collar downward and
™
Slide downward
2. Loosen the handle knob and adjust the auxiliary handle by
pivoting it to a comfortable position. Tighten the handle
knob to secure (Fig. 23).
Fig. 23
Handle knob
Auxiliary handle
3. Use the edge of the guard as a guide when cutting near
fences and walls (Fig. 24).
Fig. 24
14