Initial Operation; Setting The Clock; Preparation Of Coffee - Team International TEAM KM 29 T Manual De Instrucciones

Fax +32 2 359 95 50
FIELD OF APPLICATION/OF OPERATION
• Use the appliance for domestic purposes only and in the way indicated in these
instructions.
• This appliance is intended to be used for domestic applications and similar applications
such as:
Kitchen corners reserved for personnel in shops, offices and other professional
environments.
Farms.
The use by clients of hotels, motels and other environments with a residential
character.
Environments of the "bed and breakfast" type.

INITIAL OPERATION

When you use your appliance for the first time, pour fresh water into the water tank and switch
on the appliance (without coffee).
Once all the water has passed through, switch the appliance off and let it cool down. When it
is cold enough, repeat the process with fresh water. Repeat this process twice.

SETTING THE CLOCK

• Plug in your coffee maker. The time "12:00" will be displayed on the electronic digital clock.
• The 24 hour clock system is the default setting. To change to the 12 hour clock system,
press the HOUR button and the MIN button at the same time. "AM" or "PM" will appear on
the display.
• To set the current time, press the PROGRAMME button once. "12:00" flickers.
• Then press the HOUR button to set the hours, and the MIN button to change the minutes.
• By each impulse on one of those buttons, the hour or minutes will increase by 1 unit but if
you keep the pressure, the time will roll forward more quickly.
• When the setting is finished, wait about 3 seconds or press twice successively the
PROGRAMME button. In both cases, the set clock will stay displayed.

PREPARATION OF COFFEE

• Open the lid of the water tank.
• Using the glass carafe, pour the desired amount of water into the water tank. Make sure
not to overfill by respecting the maximum level indicated on the water tank.
• Swing the shower head so that it hangs above the water tank.
• Put a filter in the filter holder and add the desired quantity of ground coffee in the filter.
Make sure the filter holder is placed correctly in the appliance. Swing the shower head so
that it hangs above the center of the filter.
• On the shower head there is an aroma regulator; put it on the empty cup setting for mild
coffee or on the filled cup setting for strong coffee.
• Never forget to close the lid of the water tank and to place the glass carafe on the
warming plate before switching on your coffee maker.
• You can activate or deactivate the aroma function by pressing the AROMA button. The
red AROMA indicator lamp will come on when the aroma function is activated. If you use
the aroma function, the water flow will be slower which will give your coffee extra flavour.
• Press the on-off switch (0/I) twice to switch on the coffee maker. The pilot light of the
switch will be illuminated, indicating that your appliance is working. A device allows you to
keep coffee warm for as long as the coffee maker is working and the jug is standing on
the appliance.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity.
9
Assembly page 9/40
TEAM KM 29 T - 091201