Standby Mode - Maxell HYPERSHOCK CA-BTVH Manual De Usuario

LED Indicator Light Description
Pairing Status
Power On

Standby Mode

Low Battery
Status
Vibration Switch
Charging Status
Basic Key Operation
Turn On
Long press
3 seconds. The headphone will enter the pairing mode.
Turn O
Long press
then go out, and the headphone will turn o .
EN
Blue and green LED twinkle alternately
Blue LED stays on inde nitely, blue LED
ashes slowly when music playing
Blue LED stays on indefinitely
Blue LED flashes 3 times per second
* Vibration switch is on: white LED stays on inde nitely
* Vibration switch is o : white LED goes out
Red LED stays on while in charging, red LED
goes out while fully charged
, the headphone will turn on after blue LED stays on for
, the blue and green LED will stay on for 2 seconds,
2